Roof Repair – A Simple Approach Before It Gets Worse

Roofer installing flashing on skylight

A simple crack, a small leak, and minor roof damage can still bring major consequences if left unattended. Emergency roof repair can be done in order to prevent the problem from spreading. Although is does not necessarily fix the problem permanently, it at least buys you some time to contact a professional roofer.

The easiest way to check where these leaks or cracks are is to find out which part of the house is generally affected by it. Checking these areas inside the house gives you an idea where the trail leads to – if the drips are located just above the ceiling, or if it is on a different location due to the roof’s angle. This would also give you an idea about how much roof repair will cost you (time, effort and money), even before you start fixing it. Click here to read more info about roof repair.

The next thing to consider is what caused the roof damage in the first place. Before you proceed with the necessary roof repair, you need to find out if this is caused by weather conditions, wear and tear, or because of an improper design. This will help you determine if the necessary fix for this would require tougher materials (architectural instead of asphalt shingles) so as to handle different weather conditions that the roof would be dealing with. If you are able to find out that the problem is due to improper design, let the roof contractor fix it because it should be covered by their installation warranty. Read more

Roofer installing flashing on skylight
Roofer installing flashing on skylight

Aside from taking into consideration what had caused the roof damage, you also need to consider what type of roof you are dealing with. Roof repair for cedar shingles won’t necessarily apply if you’re dealing with asphalt shingles. It is best to check all the materials and tools needed to fix the job.

To name a few tools needed for the corresponding materials: hammer, chisel and hacksaw would be commonly used to repair wooden shakes. Worn wooden shakes are chiseled out carefully to avoid adjacent shingles from breaking. Once removed, old nail heads are then sawed off before putting the replacement wooden shake in place. New shingles expand once they are exposed to warm weather, so a little marginal cut to the shake should also be considered. However, a hammer and a blowtorch may just be the tools needed in dealing with shingle roofs. Some of these shingles tend to curl up and even brittle if exposed to constantly changing climates. You may need to torch curled shingles (careful not to burn them) before hammering them back in form to prevent the roof from cracking during roof repair. Lastly, wire brush and roof cement before applying the sealant for your roof repair. The brush would roughen up the damaged area so that the roof sealant can be more easily applied with a trowel.

These points may lessen the roof problems that you are having, or even fix them completely. Getting some tips in roof repair from professional roofers can help you easily fix the affected areas. However, if the situation is too much for you to handle, it is best to leave it to the roof experts.

Leave a Reply

Your email address will not be published. Required fields are marked *